C1PA08501 User Manual

The default IP address of your camera is 192.168.1.100. You can use this IP address to access the camera's network interface for camera configuration and control.

This camera supports the ONVIF Profile S standard; hence, you can interoperate with compatible devices and software. ONVIF is an open network video interface standard that enhances interoperability among devices.

If you wish to use advanced functionalities or customized settings, you can request the camera's developer documentation. These documents will provide detailed technical specifications, API documentation, and an SDK to assist with custom integration and development. Please contact our technical support for more information on how to request developer documentation.

If you forget the camera's IP address, you can reset it by following these steps:
1. Ensure the camera is powered and in the ON state.
2. Use a thin, long object, such as a needle or toothpick, to gently press and hold the reset button on the camera.
3. Wait for approximately 5 seconds until the camera's indicator light turns orange and starts flashing.
4. Release the reset button. The camera will be reset to the default IP address 192.168.1.100.
Please note that this operation will restore the camera to its factory settings, and you may need to reconfigure network settings and other parameters.

If your camera is not functioning correctly but still has power, you can attempt to enter recovery mode:
1. Ensure the camera is powered and in the ON state.
2. Use a thin, long object, such as a needle or toothpick, to gently press and hold the recovery button on the camera.
3. Wait for approximately 15 seconds until the camera indicator light turns red and starts flashing.
4. Release the recovery button. The camera will enter recovery mode.
In recovery mode, please do not interrupt the power supply, and the recovery process takes approximately 15 minutes. If recovery is not successful, please contact technical support for further assistance.